ITOM Engineering Radar Portfolio
ITOM ٍEngineering’s automotive radars are fully developed and programmed in-house, ensuring high performance and adaptability. These radar technologies were originally inherited from ITAS, a company now merged into ITOM, bringing valuable expertise and legacy innovation.
They are categorized into three main types: Short Range, Ultra Short Range, and Medium Range.Each radar type can be customized for different safety solutions.
These three types can be downloaded from here:
IT43 RadBS
Overview
IT43 RadBS is a 77 GHz automotive radar designed for blind spot monitoring in urban and highway traffic. With its corner-mounted configuration and wide field-of-view, it helps detect vulnerable road users such as pedestrians, cyclists, and scooter riders—especially during lane changes and parking maneuvers.
Challenge
Blind spot regions on vehicles create safety risks due to limited driver visibility, particularly in busy intersections and confined spaces. Standard sensors may fail under low-light or bad weather conditions, reducing their reliability and effectiveness in critical moments. Increasing safety regulations are also pushing for more advanced and consistent blind spot monitoring systems.
Solution
IT43 RadBS provides precision detection of moving objects in blind spot zones through high-frequency radar imaging. It alerts drivers in real time to potential hazards and supports compliance with evolving traffic safety regulations and programs such as Euro NCAP.
Key Benefits
- Wide field-of-view for comprehensive side and rear coverage
- Reliable detection in adverse conditions (rain, fog, darkness)
- Timely driver alerts to prevent side collisions
- Seamless integration into advanced driver assistance systems
- Supports vehicle safety goals aligned with regulatory and consumer expectations
Results
IT43 RadBS strengthens vehicle safety by providing blind spot visibility and early warnings. It enhances ADAS functionality while helping automakers respond to safety-focused regulations and consumer protection initiatives with a smarter sensing architecture.
IT43 RadIC
Overview
The IT43 RadIC is an intelligent in-cabin radar sensor developed by ITAS, designed for contactless, high-resolution detection of passengers and their vital signs. Operating in the 60–64 GHz ISM band, this compact unit is purpose-built for integration into modern vehicles via a standard 1×8 automotive connector, offering reliable performance in all driving conditions.
Challenge
Automotive manufacturers face growing demand for cabin safety features such as:
- Child presence detection to prevent hot car incidents
- Occupant verification for airbag and seatbelt systems
- Health status monitoring during emergencies
Traditional optical or pressure-based systems often fail in low visibility, under blankets, or with unresponsive occupants. Meanwhile, regulatory bodies are introducing new in-cabin safety requirements to protect vulnerable occupants.
Solution
IT43 RadIC provides a powerful alternative with contactless sensing and seamless automotive integration:
- Operating band: 60–64 GHz (ISM)
- Detection range: Up to 8 meters
- Angular resolution: 4.2° (azimuth & elevation)
- Field of view: ±60° (horizontal & vertical)
- Power consumption: <3W | Supply: 5V
- Operating temperature: –40°C to +125°C
- Compact size: 35 x 45 x 15 mm
- Automotive interface:
1×8 pin connector – optimized for in-cabin applications - Optional IP67-rated enclosure for environmental protection
Key Benefits
- Accurate and reliable child presence detection (CPD)
- Non-contact monitoring of respiration and heart rate
- Improved occupant classification and seatbelt logic
- Designed for easy OEM integration with 1×8 pin interface
- Stealth operation – no lights, cameras, or intrusive elements
- Automotive-grade thermal and mechanical durability
Results
OEMs and Tier-1 suppliers deploying IT43 RadIC gain:
- Alignment with upcoming in-cabin safety regulations (e.g., CPD mandates)
- A compact, low-power solution ready for production vehicles
- Enhanced in-cabin intelligence without visual or mechanical complexity
- Safer, smarter cabins — protecting lives through technology
IT44 RadMR
Overview
The ITAS radar solution IT44 RadMR delivers high-performance sensing with a future-ready architecture tailored for OEMs, Tier-1 suppliers, and mobility startups. Built on FMCW technology, it ensures real-time, accurate data generation even in the most demanding automotive scenarios. The solution is compact, low-power, and robust—ideal for next-gen ADAS and autonomous driving platforms.
Challenge
In today’s automotive landscape, radar systems must go beyond basic sensing. The demand is for:
- Higher detection range and resolution
- Seamless integration with other sensors (camera, LiDAR, IMU)
- Low power consumption for EVs
- Compliance with evolving regulatory requirements like GSR and Euro NCAP
Solution
The ITAS radar addresses these demands with a compact yet powerful platform:
- FMCW-based radar with 16 virtual antennas (4T4R MIMO + beamforming)
- Velocity resolution as fine as 0.1 m/s
- Detection range exceeding 250 meters
- Fine resolution: 2° azimuth, 5° elevation
- Low power draw (<3W), optimized for EVs
- IP67-rated housing with integrated heatsink
- Automotive-grade 1×8 pins connector for easy vehicle integration
Key Benefits
- Reliable and consistent real-time data output
- Developer-friendly with customizable chirp parameters
- Multiple connectivity options (CAN FD, Ethernet, SPI)
- Enables V2X communication (V2V, V2I) for collaborative sensing
- Supports critical ADAS features like ACC, AEB, LKA, and Parking Assist
- Web-based API access for rapid prototyping and system integration
- Scalable across different vehicle types and automation levels
Results
By integrating IT44 RadMR, OEMs and technology providers can achieve:
- Enhanced perception in low-visibility or dynamic environments
- Improved decision-making in autonomous systems through multi-sensor fusion
- System architectures aligned with Euro NCAP and GSR regulatory expectations
- Reduced development time with flexible integration and developer tools
IT86 RadLR (Under Development)
Overview
IT86 RadLR is a high-resolution cascaded radar operating at 76 GHz, specifically designed for long-range automotive applications. Strategically mounted on the vehicle front or corners, it provides real-time and high-precision detection of pedestrians, cyclists, and surrounding vehicles—ensuring next-level perception in both urban and highway environments.
Challenge
Today’s driver assistance systems face increasing complexity. Varying weather conditions, low visibility, and dense traffic challenge traditional sensor technologies. Limited range, poor angular accuracy, and difficulty in tracking multiple moving targets often hinder critical safety functions.
Solution
IT86 RadLR employs a cascaded MIMO architecture with a synchronized multi-chip design, enabling enhanced angular resolution and long-range detection up to 350 meters. Integrated phase shifters support advanced beamforming across multiple transmit/receive channels. The radar enables vital ADAS functionalities such as:
- Forward Collision Warning
- Adaptive Cruise Control
- Autonomous Emergency Braking
- Front Cross Traffic Alert
Key Benefits
- High spatial resolution for precise object discrimination
- Reliable operation in all weather and lighting conditions
- Broad field of view and extended detection range
- Robust performance in cluttered traffic environments
- Real-time tracking of multiple dynamic and static objects
- Sensor fusion compatibility for L2+ and L3 autonomy platforms
Results
With its superior performance and design, IT86 RadLR enables manufacturers to meet stringent standards such as Euro NCAP and GSR, while providing scalable solutions for semi-autonomous and autonomous driving systems.
Its modular DSP adapts to driving scenarios with tailored tracking, filtering, and classification for ADAS and autonomy.